Manually Adjusting Color Balance; Automatically Adjusting Color Balance - Canon Studio Solution User Manual

5. Select Save Changes As and select Custom 1, 2, 3, or 4.
6. Select Apply.
7. C1, C2, C3, or C4 will now hold your color balance settings.
To apply your color balance attributes, select C1 through C4, depending on where you
saved your attributes.

Manually Adjusting Color Balance

To manually set the color balance:
Click a color swatch to add that color to the photo. The colors on the right
are the colors associated with the numbers, from 1 to 255.
OR:
Click on the numbers between the color swatches.
1. A new color balance tool appears.
2. Adjust the color balance by dragging the bars or typing values into the
text boxes.
3. Select Save Changes As and select Image Only.

Automatically Adjusting Color Balance

You can automatically adjust color balance by choosing a neutral point
of a photo and saving those attributes to apply to all photos in the event.
Ideally you would shoot a gray or white card along with your photos to
guarantee a neutral area for accurate color balance.
To automatically adjust color balance:
1. Select the eyedropper tool above click balance.
2. Select a neutral area (black, white, or gray) in the photo.
3. The color will be adjusted automatically. Save these attributes if you want to
apply them to additional photos.
Using: Photo Workshop Toolsets
204