Showing And Setting Filenames; Showing And Copying Photo Paths - Canon Studio Solution User Manual

Showing and Setting Filenames

To show photo filenames below photos in the photo bar, right-click a photo in the
photo bar and select View > Show Filenames.
To rename a photo, right-click on a photo in the photo bar and select Edit Photo >
Rename Photo. This will be the new photo filename.
To set filenames for all new photos imported into the catalog from a camera:
1. Select Catalog from the bottom left of the software.
2. Select Set Capture Filenames.
3. Type a prefix for the Customer Identifier.
4. Select a starting Picture Number.
5. An example of your filename will appear next to Resulting filename.
6. Select OK.

Showing and Copying Photo Paths

To view the entire filename path below photos in the photo bar, right-click a photo and
select View > Show Paths.
You can also view the computer folder and paths that contain selected photos.
To open the folder containing the photos:
1. Right-click on a photo in the photo bar.
2. Select Open Containing Folder.
3. This is the location and subdirectory containing your selected photo.
To copy the file location containing the photos:
1. Right-click on a catalog photo in the photo bar.
2. Select Copy Path to Clipboard.
3. The location is now saved in your clipboard. Selecting Paste or CTRL-V will paste
the location of the photos.
172
Using: Photo Workshop