Additional Software; Canon Port Setting Tool - Canon UFR II Driver Driver Manual

Additional Software

This section describes additional software used with the printer driver.

Canon Port Setting Tool

The Canon Port Setting Tool enables you to correspond the device driver installed in your
computer with the network address for the device. If you cannot set up the fax configuration
automatically or use the Job Accounting feature properly when you are using SMB (Server
Message Block) or NDPS (Novell Distributed Print Services), you need to specify the port using
the Canon Port Setting Tool.
5
1
2
5-2
Additional Software
In Windows Explorer, double-click the following folders: [Program
Files] ➞ [Canon] ➞ [Portset].
In the [Portset] folder, double-click the [Portset.exe] icon to start the
Canon Port Setting Tool.
NOTE
• The Canon Port Setting Tool is installed with the printer driver.
• For more information on how to use the Canon Port Setting Tool, see the Online Help. To display
the Online Help, start the Canon Port Setting Tool
➞
click [Help].