Before Installation; Installation - Canon Studio Solution User Manual

 80 GB hard drive (or more depending on storage requirements)
 SVGA monitor (24-bit color at 1024x768 resolution)
 CD-ROM and CD-RW
 USB connectivity
 Microsoft Internet Explorer 5.0 or above

Before Installation

If you will be running Studio Solution over a network, you must be logged into Windows
as an Administrator during installation. This is only for installation purposes, and
afterwards the software can be used without connectivity problems by any user, if they
have permission to access Shared folders.
Note: Please make sure the dongle is not installed on the computer prior to installing the
software.

Installation

To install Studio Solution:
1. Insert the disc into the computer CD drive.
2. Setup will automatically start the installation process.
3. If a security window appears, select to Run the install.
4. The InstallShield Wizard will begin:
a. Select Next to begin the installation.
b. Read and accept the terms in the License Agreement.
c. Select Change to select a location to install Studio Solution.
i. The default location is C:\Program
d. Select Install to begin the installation.
Files\Studio Solution\
31
Getting Started