Canon Studio Solution User Manual page 168

3. Select Viewing Aspect.
4. Select a viewing aspect from the list. All viewing aspects included in your
packages will appear in the list.
OR:
1. Select a photo.
2. At the top right of the window is a viewing aspect with arrows on each side.
3. Select the < and > arrows to cycle through the available aspect ratios.
You can also add, edit, and remove aspect ratios from the list. To set up available
aspect ratios:
1. Select View from the top of the software.
2. Select Setup Aspect Ratio List.
3. A window appears.
4. Select Add to create a new aspect ratio.
a. Select a name, width, and height.
5. Select an aspect ratio and select Edit to edit an existing aspect ratio.
a. Select a name, width, and height.
6. Select an aspect ratio and select Remove to delete it.
7. Select Reset List to revert to the default list.
8. Select Move Up or Move Down to change position of an aspect ratio in the list.
9. Select and check Automatically add package aspect ratios to list to have all
aspect ratios from your packages added to the list. This option is enabled by
default.
10. Select OK.
168
Using: Photo Workshop