Editing Custom Attributes; Orienting Photos - Canon Studio Solution User Manual

c. Use the default catalog attributes.
d. Use Custom attributes 1 – 4.
e. Use a New custom setting you created (it will appear below Custom 1 –
4).

Editing Custom Attributes

To edit custom attributes, select Attributes from the very top center of the software and
select Save Attributes to > Edit. You can rename or delete your custom attribute
settings.

Orienting Photos

To quickly change the orientation of a photo, select any number of photos and select
the arrows on each side of Orient, located above the photo viewer. The left arrow
rotates clockwise and the right arrow rotates counter-clockwise.
For other orientation options, select Orient from above the photo viewer and select an
option:
Vertical: oriented as a portrait.
 Horizontal: oriented as a landscape.
 Vertical Flipped: oriented vertically but upside-down compared to the original.
 Horizontal Flipped: oriented horizontally but flipped sideways compared to the
original.
Rotate Clockwise: rotate the photo 90° clockwise. Press O as a hotkey.

 Rotate Counter-Clockwise: rotate the photo 90° counter-clockwise. Press SHIFT -
O as a hotkey.
 Flip: flip the photo 180°.
 Set Crop Orientation: this determines how the image will be cropped to fit on the
photo. Select Auto to let the software decide on a per photo basis, or select
Vertical or Horizontal.
 Set Default Orientation: this determines how photos are automatically oriented.
Select No Default Orientation to let the software decide on a per photo basis.
132
Using: Photo Library