Orienting A Photo - Canon Studio Solution User Manual

 Select Reset Scale to revert to the original size.
 Select Reset Scale and Position to revert to the original size and center the
photo. Press CTRL – R as a hotkey.
 Select a % to increase or decrease the photo size.
You can also scale a photo by moving the mouse wheel up and down.

Orienting a Photo

You can change the orientation of photos in the workspace.
Basic orientation options include:
 Select the clockwise or counter-clockwise arrows to rotate the
photo 90° in that direction.
 Select the vertical orientation box to view the photo vertically. Select the box
again to rotate it 180°.
 Select the horizontal orientation box to view the photo horizontally. Select the
box again to rotate it 180°.
Select Orientation to open a dropdown menu with additional options:
 Vertical: oriented vertically.
 Horizontal: oriented horizontally.
 Vertical Flipped: oriented vertically but upside-down compared to the original.
 Horizontal Flipped: oriented horizontally but flipped sideways compared to the
original.
 Rotate Clockwise: rotate the photo 90° clockwise. Press O as a hotkey.
 Rotate Counter-Clockwise: rotate the photo 90° counter-clockwise. Press SHIFT -
O as a hotkey.
 Flip: flip the photo 180°.
 Set Crop Orientation: this determines how the image will be cropped to fit on the
photo. Select Auto to let the software decide on a per photo basis, or select
Vertical or Horizontal.
 Set Default Orientation: this determines how photos are automatically oriented.
Select No Default Orientation to let the software decide on a per photo basis.
Using: Photo Workshop Toolsets
183