Adjusting the Color Balance
The color balance adjustment mode is available when the color mode is set to [42-Bit Color] or
[24-Bit Color]. Use this mode to adjust the balance between the three colors: red (R), green (G) and
blue (B). This mode is especially useful when a particular color is too strong or weak.
Guide to the Color Balance Tab
Red (R)
Green (G)
Blue (B)
Reset Button
Click this button to reset the color balance to the default values.
• RGB is the acronym for the three primary colors: red, green and blue. These colors can be mixed in different
combinations (gradients) to form all the colors in the visible light spectrum. You can use the color balance
adjustment mode to adjust the level of each primary color in the image.
RGB Slider Tabs
Drag the slider tabs left (weaker) or right (stronger) to
change the setting for each color.
RGB Value Input Boxes
Input values from –100 to
+100 and press the [Tab] key
to set the RGB color levels.
You can also use the
arrow keys to adjust the
values.
FilmGet FS User's Guide
Adjusting Images
83
1
2
3
4
5