Setting Up The Dolby Headphone - Dell Inspiron 4100 Solution Manual

Press and repeat to locate the Infrared Data Port option
2
under the Basic Device Configuration heading of the system setup
program.
Press the down-arrow key to highlight Disabled next to Infrared Data
3
Port.
Press the right-arrow key to highlight a COM port.
4
Ensure that the COM port that you highlight is different from the
Serial Port and Modem COM ports.
Press the down-arrow key to highlight Fast IR or Slow IR.
5
Dell recommends that you use Fast IR. If the infrared device cannot
communicate with your computer, turn off the computer and repeat
this procedure to change the setting to Slow IR.
Press to save the changes and exit the system setup program.
6
If you are prompted to restart your computer, click Yes.
Follow the instructions on the screen while the infrared sensor driver is
7
installing.
At the end of the install process, click Yes to restart the computer.
8
When your computer detects the presence of another activated
9
infrared device, double-click the infrared icon that appears on the
Windows taskbar.
See the infrared device documentation for device setup instructions.
10

Setting Up the Dolby Headphone

Double-click the Intervideo Win DVD icon on the Windows desktop.
1
Click the Properties icon
2
Click the Dolby Headphone tab.
3
Click Enable Dolby Headphone.
4
Select one of the four options to set the level of surround sound
5
effects. Option 1 is a baseline stereo option, and Options 2, 3, and 4
are surround sound levels.
.
HINT: If the infrared
device cannot
communicate with your
computer after you repeat
this procedure to change
the system setup program
setting to Slow IR,
contact the infrared
device manufacturer.
HINT:
The Dolby
headphone feature is
available only if your
computer has a DVD
drive.
HINT: Icon labels may be
visible only when you
place the pointer over the
icon.
Se t t i n g U p 27