Setting Up The Dolby Headphone; Setting Up The Apr To Connect To A Network; Setting Up The Apr For Windows Me - Dell Inspiron 8100 Solution Manual

HINT:
The Dolby
headphone feature is
available only if your
computer has a DVD
drive.
HINT:
Icon labels may be
visible only when you
place the pointer over the
icon.
HINT: A network adapter
is also referred to as a
network interface
controller (NIC).
22 Se tti n g U p

Setting Up the Dolby Headphone

Double-click the Intervideo Win DVD icon on the Windows desktop.
1
Click the Properties icon
2
Click the Dolby Headphone tab.
3
Click Enable Dolby Headphone.
4
Select one of the four options to set the level of surround sound
5
effects. Option 1 is a baseline stereo option and Options 2, 3, and 4
are surround sound levels.
Click Apply, and then click OK to close the WinDVD Properties
6
window.
Click Exit.
7
Setting Up the APR to Connect to a
Network
NOTICE: Do not install a network adapter or a network adapter/modem
combination PC Card until you complete the advanced port replicator (APR)
setup.
If you purchased the APR with an integrated network adapter, you must
first configure the computer to use the APR with a network.

Setting Up the APR for Windows Me

If the computer is on, shut down the operating system and turn off the
1
computer (see page 18).
Disconnect all external devices from the APR.
2
Connect the AC adapter to the APR and an electrical outlet.
3
Insert the computer into the APR.
4
Turn on the computer.
5
The computer automatically detects the network adapter and begins
the software installation.
At the Add New Hardware Wizard window, click Automatic search for
6
a better driver (Recommended) and then click Next.
.