Undocking The Computer - Dell Inspiron 4100 Solution Manual

Disconnect any external devices, and remove any PC Cards from the
2
computer.
Connect the AC adapter to the connector on the APR, and connect
3
the AC power cable to an electrical outlet.
Horizontally center the computer on the APR base, with the back of
4
the computer facing the APR docking connector.
Slide the computer toward the connector until you feel the grooves on
5
the bottom of the computer engage with the alignment rails.
NOTICE:
If you attempt to push the computer all the way into the APR
without engaging the alignment rails, you may irreparably damage the docking
connector on the computer. If you have a monitor stand installed, you will not
be able to see the alignment rails or the docking connector.
eject/locking
lever
Gently push the computer forward until the docking connector is fully
6
engaged.
Slide the eject/locking lever towards the back of the APR to the locked
7
position.

Undocking the Computer

NOTICE: If you do not have a charged battery installed in the computer when
you undock the computer, you may lose unsaved data.
docking connector
alignment rails (2)
Re pl a c i n g Par t s 79