Setting Up The Dolby Headphone; Setting Up The Docking Device To Connect To A Network - Dell Inspiron 4150 Owner's Manual

DVD video is visible only on the display that is set to primary. While the
DVD is playing, the DVD player window on your computer display is blank
or (if the DVD player window is set to full-screen mode) the entire
computer display screen is blank.

Setting Up the Dolby Headphone

Double-click the Intervideo Win DVD icon on the Windows desktop.
1
Click the Properties icon.
2
Click the Dolby Headphone tab.
3
Click Enable Dolby Headphone.
4
Select one of the four options to set the level of surround sound
5
effects. Option 1 is a baseline stereo option and Options 2, 3, and 4
are surround sound levels.
Click Apply, and then click OK to close the WinDVD Properties
6
window.
Click Exit.
7
Setting Up the Docking Device to
Connect to a Network
NOTICE: Do not install a network adapter or a network adapter/modem
combination PC Card until you complete the docking device setup.
NOTICE: To prevent serious operating system problems, do not connect your
computer to a docking device until the Windows operating system setup on the
computer is complete.
A docking device allows you to more fully integrate your portable computer
into a desktop environment.
For instructions and details on setting up a docking device, refer to the
documentation that came packaged with the device.
Setting Up and Using Yo ur Comput er
HINT: The Dolby
headphone feature is
available only if your
computer has a DVD
drive.
HINT: Icon labels may be
visible only when you
place the pointer over the
icon.
HINT: A network adapter
is also referred to as a
network interface
controller (NIC).
49