Dell Inspiron 4100 Solution Manual page 80

80
Re pl a c i n g Par t s
NOTICE: If you do not use correct undocking procedures, you may lose data
and the computer may not restart.
Save and close all open files and exit all open programs.
1
Perform one of the following procedures:
2
• Click the Start button, and then click Eject PC.
After a few seconds, the computer power light turns off.
• Press the undock request button on the APR.
After a few seconds, the green docking light turns off.
• Shut down the computer.
Slide the eject/locking lever on the left side of the APR to the eject
3
position to undock the computer.
eject/locking lever
docking light
undock request button