Speaker - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Primary hard drive (see
b. Optical drive (see
drive on page
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
Remove the speaker:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the Phillips PM2.0×4.0 screw (2) that secures the speaker to the base enclosure.
3. Remove the speaker (3) from the base enclosure.
Reverse this procedure to install the speaker.
84 Chapter 4 Removal and replacement procedures
Battery on page 46).
Primary hard drive on page
Optical drive on page
67)
Switch cover and keyboard on page
Display assembly on page
Top cover on page 79)
55)
60) or Secondary hard drive (see
73)
Spare part number
481109-001
Secondary hard
62)