Display Assembly - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Display assembly

Description
12.1-inch, WXGA AntiGlare display assembly
With a webcam
Without a webcam
Display bezel (includes HP logo and computer model number label)
For use with models that include a webcam
For use with models that do not include a webcam
Display bezel adhesive
Display Hinge Kit (includes left and right hinges and brackets)
Display panel cable
For use with models that include a webcam
For use with models that do not include a webcam
Microphone
Display enclosure (includes HP logo, wireless antenna transceivers and cables)
With webcam
Without webcam
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the Bluetooth compartment cover (see
6. Remove the memory module compartment cover (see
7. Remove the hard drive bay cover (see
8. Remove the broadband wireless compartment cover (see
9. Remove the switch cover and keyboard (see
Remove the display assembly:
1. Close the computer and turn it upside down, with the rear panel toward you.
2. Disconnect the wireless antenna cables from the WLAN module (1), and feed them down
through the hole (2).
Battery on page 46).
Primary hard drive on page
Switch cover and keyboard on page
Bluetooth module on page
Expansion memory module on page
55).
WWAN module on page
Component replacement procedures
Spare part number
492576-001
492575-001
495022-001
495019-001
497013-001
481098-001
495023-001
495021-001
492573-001
496490-001
495020-001
48).
50).
58).
62).
73