Table of Contents
Advertisement
Right speaker
NOTE:
The speaker spare part kit includes the cable.
Description
Speaker Kit (includes right and left speakers)
IMPORTANT:
and replacement.
Before removing the speaker, follow these steps:
1.
Shut down the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices connected to the computer.
4.
Remove the following components:
a.
Battery (see
b.
Optical drive (see
c.
Base enclosure (see
Remove the right speaker:
1.
Carefully disconnect the right speaker connector (1) from the system board.
2.
Release the display cable from the routing channels (2).
3.
Remove the Phillips M2.0 x 4 screw and Phillips M2.5 x 5 screw (3).
Make special note of each screw and screw lock size and location during removal
Battery on page
Optical drive on page
Base enclosure on page
34)
35)
37)
Spare part number
857474-001
Component replacement procedures
47
Advertisement
Table of Contents
