4.
Lift the side of the system board upward (5), and then pull the system board away from the connectors
on the side of the computer to remove it (6).
Reverse this procedure to install the system board.
Speaker
To remove the speaker, use this procedure and illustration.
Table 5-14
Speaker description and part number
Description
Speaker
Before removing the speaker, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
4.
Remove the system board (see
Remove the speaker:
1.
Remove the Phillips M2.0 × 2.0 screw (1) that secures the speaker to the computer.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
31).
System board on page
30).
46).
Component replacement procedures
Spare part number
M21400-001
30).
49