Primary Memory Module - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Primary memory module

Description
Memory modules (PC2-6400, 800-MHz, DDR2)
4-GB
2-GB
1-GB
Before removing the primary memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Release the switch cover and keyboard (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install the memory module.
72 Chapter 4 Removal and replacement procedures
Battery on page
The memory module is designed with a notch (3) to prevent incorrect insertion into the
46).
Switch cover and keyboard on page
Spare part number
492572-001
492571-001
492570-001
62).