Bluetooth Module Cable - HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Maintenance And Service Manual

Bluetooth module cable

NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number 492555-001.
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Primary hard drive (see
b. WLAN module (see
c. Optical drive (see
drive on page
d. Switch cover and keyboard (see
e. Display assembly (see
f. Top cover (see
Remove the Bluetooth module cable:
1. Release the Bluetooth module cable (1) from the opening in the base enclosure.
2. Disconnect the Bluetooth module cable (2) from the system board.
3. Remove the Bluetooth module cable.
Reverse this procedure to install the Bluetooth module cable.
Battery on page
Primary hard drive on page
WLAN module on page
Optical drive on page
67)
Switch cover and keyboard on page
Display assembly on page
Top cover on page 79)
46).
55)
52)
60) or Secondary hard drive (see
73)
Component replacement procedures
Secondary hard
62)
85