Table of Contents
Advertisement
Reverse this procedure to install the RTC battery.
Speaker
NOTE:
The speaker spare part kit includes the speaker cable.
Description
Speaker Kit
IMPORTANT:
replacement
Before removing the speaker, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Service door (see
b.
Remove the battery (see
c.
Hard drive (see
d.
Solid-state drive (see
e.
WWAN module (see
f.
WLAN module (see
g.
Optical drive (see
h.
Keyboard (see
i.
Hinge covers (see
j.
Base enclosure (see
k.
System board (see
l.
Fan/heat sink assembly (see
m.
Top cover (see
Remove the speaker:
1.
Disconnect the speaker cable (1)...
2.
Remove 2 Phillips screws (2).
70
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Make special note of each screw and screw lock size and location during removal and
Service door on page
Battery on page
Hard drive on page
Solid-state drive (select products only) on page
WWAN module (select products only) on page
WLAN module on page
Optical drive on page
Keyboard on page
Hinge cover on page
Base enclosure on page
System board on page
Fan and heat sink assembly on page
Top cover and TouchPad on page
37).
38)
39).
44).
46).
48).
55).
57).
59).
65).
Spare part number
840700-001
41).
42).
61).
Advertisement
Table of Contents
