Zoning Limits; Known Issues - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Default zone is disabled by default
The default zone on the Directors, Edge Switches, and McDATA 4Gb SAN Switches is
disabled by default. Zoning must be configured in order for devices connected to the
Director, Edge Switch, or McDATA 4Gb SAN Switch to communicate.
Some IP addresses must be avoided
If you use HAFM to manage other M-Series Fabric Directors and Edge Switches, do not
use IP addresses in the following range:
192.168.0.0 through 192.168.0.255—This subnet is used internally by the HAFM
Appliance. Using an IP address in this range causes the Call Home feature to function
incorrectly.

Zoning limits

Table 4 lists the supported zoning limits for the Edge Switches and Directors.
Table 4 Zoning limits
Number of zone members in a zone
Number of zones in a zone set
Number of unique zone members in a zone set
Total number of zone members in a zone set (where a zone
member can be in multiple zones)
Characters per zoning name
Number of unique zone members in HAFM Zoning Library
Number of zones in HAFM Zoning Library
Number of zone sets in HAFM Zoning Library
Number of end ports
Number of devices supported (including loop devices)

Known issues

This section describes the known issues related to the 1U HAFM appliance and the
HAFM software.
12
Zoning parameter
Maximum value
2048
1024
2048
4096
32
2048
1024
64
1024
1024