Hafm Software Version - HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note

Hp storageworks ha-fabric manager release notes, v08.08.00 (aa-rur6h-te, december 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

HAFM software version 08.08.00

The HAFM appliance has the latest version of the HAFM software preinstalled. It is
also contained on the HP StorageWorks ha-fabric manager software CD (Part Number
516-000008-002, Rev A). HAFM 08.08.00 applies to the 1U rack-mount appliance
only and cannot be installed on the notebook server.
All remote clients running down-level versions of HAFM are required to reinstall the client
application. You must exit HAFM before installing the latest version of HAFM. When
logging in to the HAFM appliance via the remote client, an error message is displayed
stating that the new version must be installed. Follow the instructions to install the new
version of the remote client.
Upgrading to HAFM 08.08.00 issues
The password for the Administrator must be reset to password before upgrading. If
this is not performed before upgrading, the HAFM appliance may stop immediately
after starting it.
Upgrading to HAFM 08.08.00 from 08.02.00 requires HAFM Services to be stopped
manually.
The password for HAFM Administrator does not migrate from HAFM 07.xx.xx to HAFM
08.08.00. The password is reset to the default value password in HAFM 08.08.00.
Call Home configuration is not migrated from HAFM 08.02.00 to HAFM 08.08.00
during upgrade. The Call Home information must be configured again after the upgrade.
Configuration information for switches that are not being managed locally are not
included in the upgrade.
Firmware files are included in the upgrade process, but release rules are not. Since
release rules are required when sending another firmware version to a switch, an error
results. To avoid this problem, add the latest firmware file to the firmware library. This
also adds the new release rules and resolves the problem.
HAFM 07.02.00 is not removed after upgrading to HAFM 08.xx.xx, and if the server is
rebooted, both 07.xx.xx and 08.xx.xx services are started. Be sure to remove 07.02.00
after upgrading to 08.xx.xx.
HA-Fabric Manager release notes
3

Advertisement

Table of Contents
loading

Table of Contents