Uploading An Image File By Using Tftp; Copying Image Files By Using Ftp; Preparing To Download Or Upload An Image File By Using Ftp; Downloading An Image File By Using Ftp - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Working with Software Images

Uploading an Image File By Using TFTP

You can upload an image from the switch to a TFTP server. You can later download this image to the
switch or to another switch of the same type.
Use the upload feature only if the web management pages associated with the embedded device manager
have been installed with the existing image.
Beginning in privileged EXEC mode, follow these steps to upload an image to a TFTP server:
Command
Step 1
Step 2
Step 3
archive upload-sw
tftp:[[//location]/directory]/image-name.tar
The archive upload-sw privileged EXEC command builds an image file on the server by uploading these
files in order: info, the Cisco IOS image, and the web management files. After these files are uploaded,
the upload algorithm creates the tar file format.
For the download and upload algorithms to operate properly, do not rename image names.
Caution

Copying Image Files By Using FTP

You can download a switch image from an FTP server or upload the image from the switch to an FTP
server.
You download a switch image file from a server to upgrade the switch software. You can overwrite the
current image with the new one or keep the current image after a download.
You upload a switch image file to a server for backup purposes. You can use this uploaded image for
future downloads to the switch or another switch of the same type.
Instead of using the copy privileged EXEC command or the archive tar privileged EXEC command, we
Note
recommend using the archive download-sw and archive upload-sw privileged EXEC commands to
download and upload software image files.
These sections contain this configuration information:
•
•
•
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
B-24
Appendix B
Preparing to Download or Upload an Image File By Using FTP, page B-25
Downloading an Image File By Using FTP, page B-26
Uploading an Image File By Using FTP, page B-27
Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Make sure the TFTP server is properly configured; see the
"Preparing to Download or Upload an Image File By Using TFTP"
section on page B-21.
Log into the switch through the console port or a Telnet session.
Upload the currently running switch image to the TFTP server.
• For //location, specify the IP address of the TFTP server.
For /directory/image-name.tar, specify the directory (optional)
•
and the name of the software image to be uploaded. Directory
and image names are case sensitive. The image-name.tar is the
name of the software image to be stored on the server.
OL-8915-01