Appendix; Supported Mibs; Mib List - Cisco 3020 - Catalyst Blade Switch Configuration Manual
Cisco catalyst blade switch 3020 for hp software configuration guide, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Command reference manual (744 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the switch. It
contains these sections:
•
•
MIB List
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-8915-01
MIB List, page A-1
Using FTP to Access the MIB Files, page A-3
BRIDGE-MIB
The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
Note
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community
string in the SNMP message: configured community string @x.
CISCO-CDP-MIB
CISCO-CONFIG-COPY-MIB
CISCO-CONFIG-MAN-MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-ENVMON-MIB
CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO IP-STAT-MIB
CISCO-L2L3-INTERFACE-CONFIG-MIB
CISCO-LAG-MIB
CISCO-MAC-NOTIFICATION-MIB
A P P E N D I X
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
A
A-1
Advertisement
Table of Contents
Troubleshooting
