Displaying Ipv4 Acl Configuration - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Displaying IPv4 ACL Configuration

Switch(config)# vlan access-map SERVER1_MAP 20
Switch(config-access-map)# action forward
Switch(config-access-map)# exit
Apply the VLAN map to VLAN 10.
Step 3
Switch(config)# vlan filter SERVER1_MAP vlan-list 10.
Displaying IPv4 ACL Configuration
You can display the ACLs that are configured on the switch, and you can display the ACLs that have
been applied to interfaces and VLANs.
When you use the ip access-group interface configuration command to apply ACLs to a Layer 2
interface, you can display the access groups on the interface. You can also display the MAC ACLs
applied to a Layer 2 interface. You can use the privileged EXEC commands as described in
to display this information.
Table 26-2 Commands for Displaying Access Lists and Access Groups
Command
show access-lists [number | name]
show ip access-lists [number | name]
show running-config [interface interface-id]
show mac access-group [interface interface-id]
You can also display information about VLAN access maps or VLAN filters. Use the privileged EXEC
commands in
Table 26-3 Commands for Displaying VLAN Map Information
Command
show vlan access-map [mapname]
show vlan filter [access-map name | vlan vlan-id]
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
26-30
Purpose
Display the contents of one or all current IP and MAC address access lists
or a specific access list (numbered or named).
Display the contents of all current IP access lists or a specific IP access list
(numbered or named).
Displays the contents of the configuration file for the switch or the
specified interface, including all configured MAC and IP access lists and
which access groups are applied to an interface.
Displays MAC access lists applied to all Layer 2 interfaces or the specified
Layer 2 interface.
Table 26-3 to display VLAN map information.
Chapter 26
Purpose
Show information about all VLAN access maps or the
specified access map.
Show information about all VLAN filters or about a specified
VLAN or VLAN access map.
Configuring Network Security with ACLs
Table 26-2
OL-8915-01