About The Array Configuration Utility - Command Line Interface - HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual

Installation Procedures - All Deployments

About the Array Configuration Utility - Command Line Interface

The Array Configuration Utility - Command Line Interface (ACU-CLI) is a
command line user interface that can run locally through your browser or
remotely through HP Insight Manager.
The ACU is supported for use in Windows, Linux, NetWare, and HP-UX
environments and can run locally from the server or remotely through HP Systems
Insight Manager (HP-SIM).
Note:
MSA1000/1500 Setup and Management kit. Instructions for installing the ACU-CLI on
your server are included in the configuration chapters of this guide.
For information about using the ACU-CLI, refer to the ACU-CLI section of the
Configuring Arrays Reference Guide. This guide is available on the
Documentation CD and the Technical documents page of the MSA1500 website:
http://www.hp.com/go/msa1500cs.
For more information about the ACU, refer to the ACU website:
http://h18000.www1.hp.com/products/servers/proliantstorage/
software-management/acumatrix/index.html.
64
The ACU-CLI is included on the Support Software CD inside the
HP StorageWorks 1500 Modular Smart Array Installation Guide