HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual page 22

Modular smart array
Hide thumbs Also See for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive:
Table of Contents

Advertisement

Installation Procedures - All Deployments
Table 2: MSA1500 and SAN-related websites
website
HP Storage Management
Initiative Specification provider
for the MSA
http://h18007.www1.hp.com/
support/files/storage/us/
download/23385.html
HP Secure Path
www.hp.com/go/securepath
HP MPIO Full Featured Failover
and Manager
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
22
Provides the Web-based management interface for the
management of the MSA, in compliance with the SMI-S standard.
This MSA-specific SMI-S provider can be installed on Microsoft
Windows 2000 or Windows 2003 Server hosts with access to the
MSA.
For more information about HP and SMI-S, go to the HP Storage
Management Initiative Specification website:
http://h18006.www1.hp.com/storage/smis.html
For general information about SMI-S clients and providers, go to
the following websites:
Storage Networking Industry Association (SNIA):
http://www.snia.org/home
Storage Networking Industry Association (SNIA) listings of HP
SMI-S providers:
http://www.snia.org/ctp/smi_conform
Multi-pathing software for Windows, Linux, NetWare, and HP-UX
(active/passive environments only)
Used in multi-pathing environments running active/passive array
controller firmware, Secure Path manages, monitors, and maintains
data paths between server and storage. If a path failure is
detected, traffic fails over to an alternative path.
Special Secure Path versions are available for MSA1000-only and
MSA1500-only environments. If your SAN environment includes
only MSA controllers running active/passive firmware versions 4.x
or 5.x, consider using a "Workgroup Edition" of Secure Path.
Multi-pathing software for Windows (active/active environments
only)
Used in multi-pathing environments running active/active array
controller firmware, HP MPIO Full Featured Failover and Manager
manages, monitors, and maintains data paths between server and
storage. If a path failure is detected, traffic fails over to an
alternative path.
Other multipath software already present on the host may not be
compatible with HP Full Featured MPIO. See the MSA1500
compatibility guide for details.
The HP full-featured MPIO is provided on the MSA Support
Software CD.
HP StorageWorks 1500 Modular Smart Array Installation Guide
Content

Advertisement

Table of Contents
loading

Table of Contents