Right Side Frame Gears Removal - Lexmark 2390 003 - B/W Dot-matrix Printer Service Manual

Right Side Frame Gears Removal

1. Remove the top cover
see "Top Cover Removal" on page
2. Set the paper select lever upward to the cut form position.
3. Release the latch [1] and then remove the ASF drive gear.
4. 23XX-003: Remove the two screws and remove the shaft
support plate (not shown).
5. Remove both E rings [2],[3] and then remove the ASF idler gear
and the shift gear from the right side together with their washer
and spring. To prevent the washer and spring from springing off,
hold them down while removing the E ring.
6. Remove the lower feed roller right gear [4].
4-58
4-61.