Paper Feed Motor Removal - Lexmark 2390 003 - B/W Dot-matrix Printer Service Manual

Paper Feed Motor Removal

1. Remove the top cover
see "Top Cover Removal" on page
2. Remove the sub logic board
see "Sub Logic Board Removal" on page
3. Disconnect the paper feed motor cable [1] from connector CN10
on the main logic board.
4. Remove the screw [3].
5. Rotate the paper feed motor [2] clockwise, then remove it. The
paper feed motor plate [4] can also be removed at this time as it
is held in place only by the motor [2].
238X-001 - The head gap sensor may come loose. It is held in
place by the paper feed motor plate.
6. 238X-001 - Be sure the head gap sensor is positioned correctly
before installing the paper feed motor plate.
4-38
4-61.
4-59.