Ribbon Drive Rack Gear Removal - Lexmark 2390 003 - B/W Dot-matrix Printer Service Manual

Ribbon Drive Rack Gear Removal

1. Remove the top cover
see "Top Cover Removal" on page
2. Move the forms thickness lever to position 1.
3. Position the carrier midway between the two rack mounting tabs
[1] shown.
4. Remove the stop [2], if present.
5. Release the snap [3] and move the rack [4] to the right.
6. Press the tab on the right, and move the rack down to
disengage the rack from the ribbon drive gear.
4-54
4-61.