Label Jam Removal - Lexmark 2390 003 - B/W Dot-matrix Printer Service Manual

Label Jam Removal

When a pressure-sensitive label that separates from its protective
backing has jammed and stuck to the paper separator and/or below
the carrier plate, the following procedure should be used to remove
the jammed label.
1. Remove the top cover
see "Top Cover Removal" on page
2. Remove the tractor assembly
see "Push Tractor Assembly Removal" on page
3. Remove the print unit see
4. Remove the paper separator
see"Paper Separator Removal" on page
5. Carefully remove the jammed label from the mylar strip on the
paper separator. If the mylar strip is damaged, replace the
paper separator. If the label is jammed below the carrier plate or
on the lower plastic portion of the paper guide/platen assembly,
carefully remove the jammed label without scratching either
surface or damaging the mylar strips that rest on the lower feed
rollers.
4-26
4-61.
"Print Unit Removal" on page
4-44.
4-53.
4-47.