Cisco WRP400-G1 - Wireless Router Administration Manual page 98

Advanced Voice Fields
Line page
Cisco Small Business WRP400 Administration Guide
Auth Resync-
Reboot
SIP Proxy-Require
SIP Remote-Party-
ID
SIP GUID
If this feature is enabled, the WRP400 authenticates the
sender when it receives the NOTIFY resync reboot (RFC
2617) message. To use this feature, select yes. Otherwise,
select no.
The default is yes.
The SIP proxy can support a specific extension or behavior
when it sees this header from the user agent. If this field is
configured and the proxy does not support it, it responds
with the message, unsupported. Enter the appropriate
header in the field provided.
To use the Remote-Party-ID header instead of the From
header, select yes. Otherwise, select no.
The default is yes.
The Global Unique ID is generated for each line for each
device. When it is enabled, the WRP400 adds a GUID
header in the SIP request. The GUID is generated the first
time the unit boots up and stays with the unit through
rebooting and even factory reset. This feature was
requested by Bell Canada (Nortel) to limit the registration of
SIP accounts.
The default is yes.
A
96