Cisco WRP400-G1 - Wireless Router Administration Manual page 62

Advanced Voice Fields
Info page
Cisco Small Business WRP400 Administration Guide
Call 1 and 2
Decoder
Call 1 and 2 FAX
Call 1 and 2 Type
Call 1 and 2
Remote Hold
Call 1 and 2
Callback
Call 1 and 2 Peer
Name
Call 1 and 2 Peer
Phone
Call 1 and 2 Call
Duration
Call 1 and 2
Packets Sent
Call 1 and 2
Packets Recv
Call 1 and 2 Bytes
Sent
Call 1 and 2 Bytes
Recv
Call 1 and 2
Decode Latency
Call 1 and 2 Jitter
Codec used for decoding.
Status of the fax pass-through mode.
Direction of the call. May take one of the following values:
•
PSTN Gateway Call = VoIP-To-PSTN Call
•
VoIP Gateway Call = PSTN-To-VoIP Call
•
PSTN To Line 1 = PSTN call ring through and answered by
Line 1
•
Line 1 Forward to PSTN Gateway = VoIP calls Line 1 then
forwarded to PSTN GW
•
Line 1 Forward to PSTN Number =VoIP calls Line 1 then
forwarded to PSTN number
•
Line 1 To PSTN Gateway
•
Line 1 Fallback To PSTN Gateway
Indicates whether the far end has placed the call on hold.
Indicates whether the call was triggered by a call back
request.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
A
60