Table of Contents
Advertisement
Data Fields
Wireless Configuration
Cisco Small Business WRP400 Administration Guide
Wireless > Basic Wireless Settings
Network Mode
Wireless Channel
SSID1 Network Enabled,
SSID2 Network Enabled
Wireless Network Name
(SSID)
SSID Broadcast Enabled
For Internet Access Only
The wireless standards that are running on your
network:
•
Mixed: Choose this setting if the network has
Wireless-G and Wireless-B devices.
•
Wireless-G only: Choose this setting if the
network has only Wireless-G devices
•
Wireless-B only: Choose this setting if the
network has only Wireless-B devices.
Default: Mixed
The channel that is used by the wireless
nework. To enable the WRP400 to select the
best available wireless channel, choose Auto.
Default: Auto
When this feature is enabled, the network is
active.
A name for your wireless network, including up
to 32 characters. Any character on the keyboard
can be used. The name is case sensitive.
The default wireless network (SSID1) uses a
name with the following pattern: cisco<MAC>
where <MAC> represents the last four digits of
the wireless MAC address of the WRP400.
When this feature is enabled, the WRP400
allows its SSID to be detected by wireless
clientsdevices within range. When this feature is
disabled, a wireless device can connect to the
network only if the user enters the network
name to establish a connection.
Applies to SSID2 only. When this feature is
enabled, connected devices have access to the
Internet but are blocked from accessing to your
local network. This feature is useful for
establishing a guest wireless network for use by
customers and visitors.
B
131
Advertisement
Table of Contents
