Cisco WRP400-G1 - Wireless Router Administration Manual page 130

Data Fields
Setup
Cisco Small Business WRP400 Administration Guide
Max. Idle Time
Keep Alive
Card Status
Configure Mode
Card Model
Carrier
Country
Carrier
Access Point Name (APN)
Dial Number
User Name and Password
(Optional)
SIM PIN (Optional)
Server Name (Optional)
Authentication
The number of minutes of inactivity that can
elapse before an Internet connection is
terminated.
Default: 5 minutes
When this feature is enabled, the WRP400
periodically checks the Internet connection. If
the connection is terminated, then the WRP400
automatically re-establishes the connection.
The current modem connection status as
Detecting, Connecting, or Connected.
• Auto: When this mode is enabled, the
WRP400 automatically detects which card
model was inserted and which carrier is
available.
• Manual: When this mode is enabled, the
connection is established manually.
The data card model that is inserted in the USB
port.
The mobile network service provider for Internet
connection. This setting is required when you
are using HSDPA/UMTS/GPRS Internet service.
The card issue country
The card issue provider
The name that the mobile network service
provider has assigned to the particular Internet
network for this connection.
The dial number that is used to access the
mobile network service.
The user name and password, if any, provided
by your mobile network service provider.
The PIN code associated with your SIM card, if
required.
The name of the server for the Internet
connection, if required.
The type of authentication used by your service
provider.
Default: Auto
B
128