Cisco WRP400-G1 - Wireless Router Administration Manual page 144

Data Fields
Applications and Gaming
Cisco Small Business WRP400 Administration Guide
Upstream Bandwidth
Category
To allow the WRP400 to control the maximum
bandwidth for upstream data transmissions,
keep the default, Auto. To manually set the
maximum, select Manual, and enter the
appropriate number in the field provided.
Identify the category by choosing Application,
Online Games, MAC Address, or Ethernet Port.
Application: Application: Select an application
from the list or click Add a New Application.
• Enter a Name: A name to identify the
application.
• Port Range: The range of ports for this
application. You can have up to three ranges
to define for this bandwidth allocation. Port
numbers can range from 1 to 65535. Check
your application's documentation for details
on the service ports used.
• Protocol: Choose TCP, UDP, or Both.
• Priority: Select the appropriate priority: High,
Medium (Recommend), Normal, or Low.
Online Games: Select a game from the list, or
click Add a New Game.
• Enter a Name: Enter any name to indicate the
name of the entry.
• Port Range: The range of ports for this game.
For example, ito allocate bandwidth for FTP,
enter 21-21. If you need services for an
application that uses from 1000 to 1250, you
enter 1000-1250 as your settings. You can
have up to three ranges to define for this
bandwidth allocation. Port numbers can
range from 1 to 65535. Check your
application's documentation for details on
the service ports used.
• Protocol: Choose TCP, UDP, or Both.
• Priority: Select the appropriate priority: High,
Medium (Recommend), Normal, or Low.
B
142