Cisco WRP400-G1 - Wireless Router Administration Manual page 68

Advanced Voice Fields
SIP page
Cisco Small Business WRP400 Administration Guide
Reg Min Expires
Reg Max Expires
Reg Retry Intvl
Reg Retry Long
Intvl
Reg Retry Random
Delay
Reg Retry Long
Random Delay
Reg Retry Intvl Cap The maximum value to cap the exponential back-off retry
Minimum registration expiration time allowed from the
proxy in the Expires header or as a Contact header
parameter. If the proxy returns a value less than this setting,
the minimum value is used.
The default is 1.
Maximum registration expiration time allowed from the
proxy in the Min-Expires header. If the value is larger than
this setting, the maximum value is used.
The default is 7200.
Interval to wait before the WRP400 retries registration after
failing during the last registration.
The default is 30.
When registration fails with a SIP response code that does
not match
Retry Reg RSC
, the WRP400 waits for the specified length
of time before retrying. If this interval is 0, the WRP400
stops trying. This value should be much larger than the Reg
Retry Intvl value, which should not be 0.
The default is 1200.
Random delay range (in seconds) to add to
Intvl
when retrying REGISTER after a failure.
The default is 0, which disables this feature.
Random delay range (in seconds) to add to
Long Intvl
when retrying REGISTER after a failure.
The default is 0, which disables this feature.
delay (which starts at
every REGISTER retry after a failure). In other words, the
retry interval is always at
a failure. If this feature is enabled,
is added on top of the exponential back-off adjusted delay
value.
The default value is 0, which disables the exponential back-
off feature.
Register Retry Intvl
and doubles on
Register Retry Intvl
Reg Retry Random Delay
A
Register Retry
Register Retry
seconds after
66