Cisco WRP400-G1 - Wireless Router Administration Manual page 161

WRP400 Provisioning Reference
Feature/XML
Tag
PPP Demand
<PPP_DEMAND>
Cisco Small Business WRP400 Administration Guide
Parameters
Heartbeat for Telstra Cable Network
Parameters
hb_server_ip: Heartbeat server IP
address
ppp_username: User name; enter from 1
to 63 ASCII characters
ppp_passwd: Password; enter from 1 to
63 ASCII characters
<PPP_DEMAND>ppp_demand,ppp_redia
lperiod</PPP_DEMAND>
ppp_demand: PPP Demand Type; 1
(Connect on Demand) or 0 (Keep Alive)
ppp_idletime: Maximum idle time in
minutes; numerals from 1 to 9999
ppp_redialperiod: Redial period in
seconds; numerals from 2 to 180
Examples
To configure a Telstra Cable connection:
<WAN_TYPE>wan_proto=
heartbeat,ppp_username=adc,ppp_
passwd=def,hb_ server_ip= 192. 1 68. 0. 1 6</
WAN_TYPE>
Fail Pattern:
<WAN_TYPE>wan_proto=dhcpd
</WAN_TYPE>
<WAN_TYPE>wan_proto=static,wan_ ipaddr=
192. 1 68.0. 1 1,wan_netmask= 255. 255.255. 1 28</
WAN_TYPE>
<WAN_TYPE>wan_proto=l2tp,ppp_
passwd=def,l2tp_server_ip=192. 1 68.
0. 1 5 </WAN_TYPE>
<WAN_TYPE>wan_proto=heartbeat,
ppp_username=adc,ppp_passwd=def
</WAN_TYPE>
<WAN_TYPE>wan_proto=static,wan_
ipaddr=aaabbb,wan_netmask=255.
255.255. 1 28,wan_gateway=192. 1 68.0. 252</
WAN_TYPE>
To configure PPP to connect on demand:
<PPP_DEMAND>ppp_ demand=1, ppp_
idletime=666</PPP_ DEMAND>
To configure PPP to keep alive: <PPP_
DEMAND>ppp_demand=0,ppp_redial
period=77</PPP_DEMAND>
C
159