Cisco WRP400-G1 - Wireless Router Administration Manual page 102

Advanced Voice Fields
Line page
Cisco Small Business WRP400 Administration Guide
Ans Call Without
Reg
Use DNS SRV
DNS SRV Auto
Prefix
Proxy Fallback Intvl This parameter sets the delay (sec) after which the
Proxy Redundancy
Method
Voice Mail Server
Mailbox Subscribe
Expires
Expires value in sec in a REGISTER request. The WRP400
will periodically renew registration shortly before the
current registration expired. This parameter is ignored if
the Register parameter is no. Range: 0 – (231 – 1) sec
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
The default is no.
If enabled, the WRP400 will automatically prepend the
Proxy or Outbound Proxy name with _sip._udp when
performing a DNS SRV lookup on that name.
The default is no.
WRP400 will retry from the highest priority proxy (or
outbound proxy) servers after it has failed over to a lower
priority server. This parameter is useful only if the primary
and backup proxy server list is provided to the WRP400 via
DNS SRV record lookup on the server name. (Using
multiple DNS A record per server name does not allow the
notion of priority and so all hosts will be considered at the
same priority and the WRP400 will not attempt to fall back
after a fail over).
The default is 3600
The WRP400 will make an internal list of proxies returned in
DNS SRV records. In normal mode, this list will contain
proxies ranked by weight and priority.
if Based on SRV port is configured the WRP400 does
normal first, and also inspect the port number based on 1st
proxy's port on the list.
The default is Normal.
Enter the URL or IP address of the server.
Expiry time to the voice mail server. The time to send
another subscribe message to the voice mail server.
A
100