Cisco WRP400-G1 - Wireless Router Administration Manual page 101

Wireless-g broadband router with 2 phone ports and built-in analog telephone adapter
Hide thumbs Also See for WRP400-G1 - Wireless Router:
Table of Contents

Advertisement

Advanced Voice Fields
Line page
Cisco Small Business WRP400 Administration Guide
Xfer When Hangup
Conf
Voice tab > Line page >
Proxy and Registration section
Proxy
Outbound Proxy
Use Outbound
Proxy
Use OB Proxy In
Dialog
Register
Make Call Without
Reg
Register Expires
Makes the ATA perform a transfer when a conference call
has ended. Select yes or no from the drop-down menu.
The default is yes.
SIP proxy server for all outbound requests.
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Enablse the use of an
Outbound Proxy
and
are ignored.
The default is no.
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the parameter
Outbound Proxy
is no, or the
empty.
The default is yes.
Enable periodic registration with the
parameter is ignored if
The default is yes.
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
The default is no.
Allow answering inbound calls without successful
(dynamic) registration by the unit. If proxy responded to
REGISTER with a smaller Expires value, the WRP400 will
renew registration based on this smaller value instead of
the configured value. If registration failed with an Expires
too brief error response, the WRP400 will retry with the
value given in the Min-Expires header in the error response.
The default is 3600.
Outbound Proxy
. If set to no, the
Use OB Proxy in Dialog
Outbound Proxy
Proxy
Proxy
is not specified.
A
parameters
Use
parameter is
parameter. This
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrp400Small business pro wrp400

Table of Contents