Save All User Data; Load All User Data; Initialize; Service Password - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

PROJECTOR SETUP menu

SAVE ALL USER DATA

This saves various setting values as a backup to the
internal memory of the projector.
Press ▲▼ to select [SAVE ALL USER
1 )
DATA].
2 ) Press <ENTER> button.
z
The [SECURITY PASSWORD] screen will be
displayed.
3 ) Enter the password set for the
[SECURITY PASSWORD].
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
4 )
<ENTER> button.

LOAD ALL USER DATA

This loads various setting values that were saved as a
backup to the internal memory of the projector.
Press ▲▼ to select [LOAD ALL USER
1 )
DATA].
2 ) Press <ENTER> button.
z
The [SECURITY PASSWORD] screen will be
displayed.
3 ) Enter the password set for the
[SECURITY PASSWORD].
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
4 )
<ENTER> button.
Note
z
If this is executed, the projector enters a standby state in
order to reflect the setting values.
86
- ENGLISH

INITIALIZE

This returns various setting values to their factory
default settings.
Press ▲▼ to select [INITIALIZE].
1 )
2 ) Press <ENTER> button.
z
The [SECURITY PASSWORD] screen will be
displayed.
3 ) Enter the password set for the
[SECURITY PASSWORD].
z
The [INITIALIZE] screen will be displayed.
Press ▲▼ to select the desired
4 )
initialize item.
All setting values including [ENTRY
SIGNAL], [NETWORK/E-MAIL], and
ALL USER [LOGO IMAGE] are returned to their
DATA factory default values.
The projector enters a standby state
in order to reflect the setting values.
All setting values saved for each of
the input signals are cleared.
ENTRY To clear just some registered
SIGNAL signals, perform the procedure
described in "Deleting a registered
Æ
data" (
All setting values in [NETWORK
NETWORK/
SETUP] and [E-mail setup] settings
E-MAIL
will return to factory settings.
The registered image data for
LOGO IMAGE [LOGO1] will return to factory
settings.
5 ) Press <ENTER> button.
The confirmation screen will be displayed.
z
Press ◄► to select [OK], and press
6 )
<ENTER> button.

SERVICE PASSWORD

This function is used by a service person.
page 89).