Back Color; Startup Logo; Freeze - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

DISPLAY OPTION menu
J
OSD DESIGN
This sets the color of the on-screen display (OSD).
1 : Yellow
6 : Brown
5 : Pink
J
OSD MEMORY
The current menu cursor position will be retained
temporarily unless the projector switched off.
ON
J
INPUT GUIDE
This sets whether to display the currently
selected input guide at the position set for [OSD
POSITION].
ON
J
WARNING MESSAGE
This sets the display of warning messages.
ON

BACK COLOR

This sets the color for the projection screen when no
signals are being input.
Press ▲▼ to select [BACK COLOR].
1 )
Press ◄► to switch [BACK COLOR].
2 )
z
The setting will change as follows each time
◄► is pressed.
BLUE
LOGO2
The entire projection area will
BLUE
appear blue.
The entire projection area will
BLACK
appear black.
The picture registered by the user
LOGO1 will be projected in the projection
area.
LOGO2 The Panasonic logo is projected.
74
- ENGLISH
Note
z
Separate software is required in order to create the
pictures to use for [LOGO1]. Consult your dealer.
2 : Blue

STARTUP LOGO

3 : White
This sets the startup logo that is projected when the
power is turned on.
4 : Green
Press ▲▼ to select [STARTUP LOGO].
1 )
Press ◄► to switch [STARTUP LOGO].
2 )
OFF
LOGO2
LOGO2
LOGO1
OFF
Note
z
Separate software is required in order to create the
pictures to use for [LOGO1]. Consult your dealer.
z
STARTUP LOGO will be displayed for 15 seconds.
OFF

FREEZE

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press ▲▼ to select [FREEZE].
1 )
2 ) Press <ENTER> button.
BLACK
LOGO1
z
The setting will change as follows each time
◄► is pressed.
NONE
The Panasonic logo is projected.
NONE No startup logo is projected.
The picture registered by the user
will be projected.
z
Press <MENU> button to escape.
LOGO1