No Signal Shut-Off; Remote2 Mode; Function Button; Date And Time - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

PROJECTOR SETUP menu

NO SIGNAL SHUT-OFF

You can set the timer to switch off the power of the
projector after a certain period of time automatically
when no signal is detected.
Press ▲▼ to select [NO SIGNAL
1 )
SHUT-OFF].
Press ◄► to switch [NO SIGNAL
2 )
SHUT-OFF].
DISABLE
10MIN. - 90MIN. At intervals of 10 minutes.

REMOTE2 MODE

You can customize the [REMOTE 2 IN] terminal
function.
Press ▲▼ to select [REMOTE2 MODE].
1 )
Press ◄► to switch [REMOTE2
2 )
MODE].
z
The setting will change as follows each time
◄► is pressed.
DEFAULT
The pin assignment of the [REMOTE
DEFAULT 2 IN] terminal is used as the projector
default setting. (
This is used for changing the settings
for the REMOTE2 terminal.
USER Any settings you make for pins 2
to 8 become valid once you press
<ENTER> button.
L6500 Use the setting for L6500-compatible
SERIES REMOTE 2 terminal.
84
- ENGLISH
Deactivate the NO SIGNAL
SHUT-OFF.
USER L6500 SERIES
Æ
page 120)

FUNCTION BUTTON

You can assign a certain menu function to the
<FUNCTION> button as shortcut.
Press ▲▼ to select [FUNCTION
1 )
BUTTON].
2 ) Press <ENTER> button.
z
The [FUNCTION BUTTON] screen will be
displayed.
Press ▲▼ to select a function.
3 )
DISABLE Deactivate the <FUNCTION> button.
Changes between OFF/USER1/
P IN P USER2/USER3 in P IN P.
Æ
( page 87)
SUB Displays the assigned SUB MEMORY
Æ
MEMORY LIST. ( page 90)
SYSTEM Switches [SYSTEM SELECTOR]
Æ
SELECTOR options. (
SYSTEM
Switches [SYSTEM DAYLIGHT
DAYLIGHT
VIEW] options. (
VIEW
FREEZE Freezes the image.
WAVEFORM Displays the waveform of the input
Û
MONITOR signal.
Û
: PT-DZ8700U only
4 ) Press <ENTER> button.

DATE AND TIME

This lets you set the time zone and the current date
and time for the projector's internal clock.
J
Setting the TIME ZONE
Press ▲▼ to select [DATE AND TIME].
1 )
2 ) Press <ENTER> button.
Press ▲▼ to select [TIME ZONE].
3 )
Press ◄► to switch [TIME ZONE].
4 )
J
Adjusting the date and time
manually
Press ▲▼ to select [DATE AND TIME].
1 )
2 ) Press <ENTER> button.
Press ▲▼ to select [ADJUST CLOCK].
3 )
page 57)
Æ
page 55)