Print - Konica Minolta bizhub PRO 950 User Manual

Mac OS 9 Printing
8.2

Print

After a document has been created in an application, it can be printed on a
bizhub PRO 950.
Printing the document is initiated in the Print dialog, which calls the printer
driver to generate a PostScript data stream, the job. The data stream
represents the elements on the document pages. It is amended by detailed
instructions for processing, the job ticket. The job ticket contains
information like page size and orientation, number of copies, tray selection,
imposition and finishing modes.
To print a document, select File » Print
In each panel of the Print dialog you can select the printer which
corresponds to the target bizhub PRO 950.
On opening, the Print dialog shows the General panel. Within this panel,
you can select the following options:
•
The range of pages to be printed
•
The number of copies to be printed
•
Paper source – the tray to be used for printing.
Autoselect means the selection is performed in the engine, based on
output paper size, orientation, and finishing requirements.
See sections "Paper" and "Page Settings" for details on paper and tray
selection.
• Reverse order – selects front to back or back to front printing. Reordering
is applied to document pages, i.e., pages are reversed before imposition
(booklet etc.) is performed. See also "Face up" in section "Finishing".
bizhub PRO 950 Printer Driver
8-2