Konica Minolta bizhub PRO 1051 User Manual page 88

Windows Printing
Multi Half Fold Details
These checkboxes allow special handling details for documents in Multi
Half Fold mode.
Stitch: two staples are applied along the center fold line (similar to a
booklet)
Trim: the sheets are folded and then cut at the open side to avoid the
wedge that occurs on the open side of the booklet when many sheets are
folded
This function is not visible unless the Saddle Stitcher is connected. See
section 6.3.14 "Configure".
Face Up
This checkbox selects if copies are output face up.
Face up turns each sheet upside down on output. So if you print a simplex
job of n pages face up, then page n will be on top, and page 1 at the
bottom.
N to 1
This checkbox changes the order of output paper. When activated, the last
page of a job is printed and therefore output first.
bizhub PRO 1200/1200P/1051
Note
6
6-28