Konica Minolta bizhub PRO 1051 User Manual page 111

Windows Printing
Forms Print Mode
"Repeated" overlays a form on every page of the job. "Once" creates an
overlay on the first page of a job. For multi-page forms, specifying a form
means that the first page of the form is overlaid on the first job page and
the following form pages continue on the following job pages. E.g. overlay
[Once] for a two-page form on an 12 page job means that the form pages
are overlaid on pages 1 to 2 of the job. Overlay [Repeated] means that
page 3 to 4, 5 to 6 ... and 11 to 12 are overlaid with the two form pages
again.
Once: the explanation graphic shows how the 2 page form used here is
assigned to the job pages. Form page 1 is assigned to job page 1, form
page 2 is assigned to job page 2. All other job pages are left without form.
Repeated: the explanation graphic shows that form page 1 is assigned to
job page 1, form page 2 to job page 2, and again form page 1 to job page
3. This pattern is repeated to the end of the job,
Per Page Settings
In this list you can enter specific forms overlay per page individually.
However, the space is limited, and the maximum number of entries in the
table depends on the amount of used forms and target pages (or page
ranges).
Prepend/Append
Determines that the pages of the selected form are prepended in front of
the current job or appended behind the current job.
bizhub PRO 1200/1200P/1051
6
6-51