Konica Minolta bizhub PRO 1051 User Manual page 129

Mac OS X Printing
In the Paper Feed panel, you can select the following options:
Paper source – the tray to be used for printing. Autoselect means the
selection is performed in the engine, based on output paper size,
orientation, and finishing requirements. See sections 6.3.4 "Paper" and
6.3.6 "Page Settings" for details on paper and tray selection.
Do not use the [First page from] option in this dialog. To print pages from
other trays than the job tray, use the selections in the Cover and Page
Settings panels of the printer driver Plug-in. See sections 6.3.5 "Cover"
and 6.3.6 "Page Settings".
In the Paper Handling panel, you can select the following option:
Reverse order – selects front to back or back to front printing.
Reordering is applied to document pages, i.e., pages are reversed
before imposition (booklet etc.) is performed. See also [Face up] in
section 6.3.3 "Finishing".
In the Output Options panel, you can select the following options:
Save as File – allows you to print your job to a file (as PDF or as
PostScript) and let it be printed on a bizhub PRO 1200/1200P/1051 to
which you are not connected now.
Note: When you print to a PostScript file, code for some features of the
plug-in will not be included in the job because the CUPS filter will not run.
To confirm printing, click the Print button.
bizhub PRO 1200/1200P/1051
Note
7
7-3