Konica Minolta bizhub PRO 1051 User Manual page 79

Windows Printing
Top Bind – binding and duplexing at the top
(e.g. as on a calendar)
For more effects of Binding Position see [Staple] and [Punch] in the section
6.3.3 "Finishing".
Page Interval
Determines a fixed margin to be applied between the two document pages
of an imposition which are printed on the same side of a sheet.
Allowed values are -250 to 250 mm (step 0.01 mm). Each page is shifted
by the given amount, i.e. the resulting margin is twice the specified value. A
negative interval shifts both pages to and clips them at the center of the
page.
Outside Offset
Compensates for creep, i.e. the effect that outer pages of a booklet do not
line up with the inner pages when they are folded. To align bitmaps on the
pages, the bitmaps of outer pages are moved outwards on the sheet.
Outside Offset is applied in addition to Page Interval.
Allowed values are 0 to 5 mm (step 0.01 mm) offset per sheet.
Original size
Select the page size of your document. A variety of common page sizes is
available. Also you can define custom page sizes in the [Paper] panel. After
defining, they become available in this list. To define a PostScript Custom
Page Size here, click on [Custom size] and enter your desired values. See
section 6.1.2 "Custom Page Size" for details.
The item [Original size] in this panel is a mirrored item from [Original
size] in the Basic panel and in the page setup dialog of your application.
All settings made here directly alter the corresponding settings in the
[Basic] panel.
bizhub PRO 1200/1200P/1051
Note
6
6-19