TANDBERG TT1260 Reference Manual page 94

Glossary
LO
LSB
Luminance
LVDS
Macroblock
Mbit/s
MCC
MCPC
MEM
MMDS
Motion Compensation
Motion Estimation
Motion Vector
MP@ML
MP@HL
MPEG
MPEG-2
MSB
Msymbol/s
Multiplex
MUSICAM
Mux
Network
NICAM
NIT
Page A-6
Local Oscillator.
Least significant bit.
The television signal representing brightness, or the amount of light at any point in a picture. The Y in YC
Low Voltage Differential Signal: LVDS is a generic multi-purpose Interface standard for high speed / low power
data transmission. It was standardised in ANSI/TIA/EIA-644-1995 Standard (aka RS-644).
A 16x16-pixel area of the TV picture. Most processing within the MPEG domain takes place with macro blocks.
These are converted to four 8x8 blocks using either frame DCT or field DCT. Four 8 x 8 blocks of luminance data
and two (4:2:0 chrominance format), four (4:2:2) or eight (4:4:4) corresponding 8 x 8 blocks of chrominance data
coming from a 16 x 16 section of the luminance component of the picture. Macroblock can be used to refer to the
sample data and to the coded representation of the sample values and other data elements.
Million bits per second.
Multiplex Control Computer: A component of a System 3000 compression system. The MCC sets up the
configuration for the System 3000 Multiplexers under its control. The MCC controls both the main and backup
Multiplexer for each transport stream.
Multiple Channels Per Carrier.
Multiplex Element Manager: A GUI based control system, part of the range of TANDBERG Television
compression system control element products. The evolution 5000 MEM holds a model of the system hardware.
Using this model, it controls the individual system elements to configure the output multiplexes from the incoming
elementary streams. The MEM monitors the equipment status and controls any redundancy switching.
Multichannel Microwave Distribution System: A terrestrial microwave direct-to-home broadcast transmission
system.
The use of motion vectors to improve the efficiency of the prediction of sample values. The prediction uses motion
vectors to provide offsets into the past and/or future reference frames or fields containing previously decoded
sample values that are used to form the prediction error signal.
The process of estimating motion vectors in the encoding process.
A two-dimensional vector used for motion compensation that provides an offset from the co-ordinate position in the
current picture or field to the co-ordinates in a reference frame or field.
Main Profile at Main Level: A subset of the MPEG-2 standard, which supports digital video storage (DVD etc.)
and transmissions up to 15 Mbit/s over various mediums.
Main Profile at High Level: A subset of the MPEG-2 standard, which supports digital video storage (DVD etc.)
and transmissions up to 80 Mbit/s over various mediums.
Moving Pictures Experts Group: The name of the ISO/IEC working group, which sets up the international
standards for digital television source coding.
Industry standard for video and audio source coding using compression and multiplexing techniques to minimise
video signal bit-rate in preparation for broadcasting. Specified in ISO/IEC 13818. The standard is split into layers
and profiles defining bit-rates and picture resolutions.
Most significant bit.
(Msym/s) Mega (million) Symbols per second (10
A number of discrete data streams (typically 8 to 12), from encoders, that are compressed together in a single
DVB compliant transport stream for delivery to a Modulator.
Masking pattern adapted Universal Sub-band Integrated Coding And Multiplexing: An audio bit-rate
reduction system relying on sub-band coding and psychoacoustic masking.
Multiplexer: Transmission Multiplexer: receives EMMs from the ACC, ECMs from the BCC, video/audio data from
the encoders, and the SI stream from the SIC. It then multiplexes them all into a single DVB-compliant transport
stream, and delivers the signal to the uplink after modulation.
The Multiplexer also contains the cypher card, which scrambles the services according to the control words
supplied by the BCC.
In the context of broadcasting: a collection of MPEG-2 transport stream multiplexes transmitted on a single
delivery system, for example, all digital channels on a specific cable system.
Near Instantaneously Companded Audio Multiplex: Official name is NICAM 728. Used for digital stereo
sound broadcasting in the UK employing compression techniques to deliver very near CD quality audio.
728 refers to the bit-rate in kbit/s.
Network Information Table: Part of the service information data. The NIT provides information about the physical
organisation of each transport stream multiplex, and the characteristics of the network itself (such as the actual
frequencies and modulation being used).
Symbols per second).
6
Reference Guide: TT1260 Contribution Receiver
C
R B.
ST.RE.E10100.1