TANDBERG TT1260 Reference Manual page 153

E. Using the TT1260 with the TANDBERG
Contents
E.1 Configuring the TT1260 for Use With Director ..........E-3
E.1.1 Getting Started..............................................E-3
E.1.2 Using the TT1260 in the Over-air Mode .......E-3
E.2 Response to Over-air Commands.............................E-4
E.2.1 Scope of This Section...................................E-4
E.2.2 Display On-screen Display (OSD)
Messages .....................................................E-4
E.2.3 Store Carrier Data.........................................E-4
E.2.4 Set Power-up Channel..................................E-4
E.2.5 Force Carrier Retune ....................................E-4
E.2.6 Force Service Selection................................E-5
E.2.7 Set Emergency Channel...............................E-5
E.2.8 Set Relays ....................................................E-5
E.2.9 Local Lockout................................................E-5
E.2.10 Abort NCP Command ...................................E-5
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.1
Annex E
Director System
Page E-1